MULTIOVEN - EO241264M
Model: EO241264M
Display error message/lights/acoustic signal |
ERROR MESSAGE: E0:11 Err DESCRIPTION: Temperature probe malfunction SOLUTION: Unplug the unit, and wait until it cools down. Make sure there isn’t anything covering the unit. and turn it back again. ERROR MESSAGE: E0:12 Err DESCRIPTION: Temperature probe malfunction SOLUTION: Unplug the unit, and wait until it cools down. Make sure there isn’t anything covering the unit. and turn it back again. ERROR MESSAGE: E0:21 Err DESCRIPTION: Target temperature not reached: The oven cannot reach the target temperature in a reasonable time range SOLUTION: Unplug the unit, and wait until it cools down. Make sure there isn’t anything covering the unit. and turn it back again. ERROR MESSAGE: E0:22 Err DESCRIPTION: Over temperature: The oven reaches excessive temperature SOLUTION: Unplug the unit, and wait until it cools down. Make sure there isn’t anything covering the unit. and turn it back again. ERROR MESSAGE: E0:27 Err DESCRIPTION: Unexpected heating: The temperature probe detected a temperature rise when heating elements should be OFF SOLUTION: Unplug the unit, and wait until it cools down. Make sure there isn’t anything covering the unit. and turn it back again. |
Product information |
Look at the DLS or website manual |
Doesn't switch on |
If the above solution does not solve the problem, probably the oven had a malfunction. The agent needs to find out how it happened. We have to determine if the warranty could be applied, If not the repair/replacement has to be out of pocket |
Leaking water/oil/gas/steam |
This is normal. The condensation created by toasting bread and frozen bread will run down the inside of the door glass and collect into a special slot on the internal lower side of the door. |